OhMyZsh Custom Ordner in .config verschoben

.config/alacritty/alacritty.toml

@@ -1,6 +1,6 @@
 [window]
 dynamic_padding = true
-opacity = 0.7
+opacity = 0.85
 blur = true
 
 [font]

.config/btop/btop.conf

@@ -1,257 +0,0 @@
-#? Config file for btop v. 1.4.5
-
-#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
-#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
-color_theme = "Default"
-
-#* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = True
-
-#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = True
-
-#* Set to true to force tty mode regardless if a real tty has been detected or not.
-#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = False
-
-#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
-#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
-#* Use whitespace " " as separator between different presets.
-#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
-presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
-
-#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
-#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = False
-
-#* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = True
-
-#* Default symbols to use for graph creation, "braille", "block" or "tty".
-#* "braille" offers the highest resolution but might not be included in all fonts.
-#* "block" has half the resolution of braille but uses more common characters.
-#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
-#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
-graph_symbol = "braille"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_cpu = "default"
-
-# Graph symbol to use for graphs in gpu box, "default", "braille", "block" or "tty".
-graph_symbol_gpu = "default"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_mem = "default"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_net = "default"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_proc = "default"
-
-#* Manually set which boxes to show. Available values are "cpu mem net proc" and "gpu0" through "gpu5", separate values with whitespace.
-shown_boxes = "mem proc cpu"
-
-#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
-update_ms = 1200
-
-#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
-#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
-proc_sorting = "cpu lazy"
-
-#* Reverse sorting order, True or False.
-proc_reversed = False
-
-#* Show processes as a tree.
-proc_tree = False
-
-#* Use the cpu graph colors in the process list.
-proc_colors = True
-
-#* Use a darkening gradient in the process list.
-proc_gradient = True
-
-#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = False
-
-#* Show process memory as bytes instead of percent.
-proc_mem_bytes = True
-
-#* Show cpu graph for each process.
-proc_cpu_graphs = True
-
-#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = False
-
-#* Show proc box on left side of screen instead of right.
-proc_left = False
-
-#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = False
-
-#* In tree-view, always accumulate child process resources in the parent process.
-proc_aggregate = False
-
-#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
-#* Select from a list of detected attributes from the options menu.
-cpu_graph_upper = "Auto"
-
-#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
-#* Select from a list of detected attributes from the options menu.
-cpu_graph_lower = "Auto"
-
-#* If gpu info should be shown in the cpu box. Available values = "Auto", "On" and "Off".
-show_gpu_info = "Auto"
-
-#* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = True
-
-#* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = False
-
-#* Show cpu box at bottom of screen instead of top.
-cpu_bottom = False
-
-#* Shows the system uptime in the CPU box.
-show_uptime = True
-
-#* Shows the CPU package current power consumption in watts. Requires running `make setcap` or `make setuid` or running with sudo.
-show_cpu_watts = True
-
-#* Show cpu temperature.
-check_temp = True
-
-#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
-cpu_sensor = "Auto"
-
-#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = True
-
-#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
-#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
-#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
-#* Example: "4:0 5:1 6:3"
-cpu_core_map = ""
-
-#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
-temp_scale = "celsius"
-
-#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = False
-
-#* Show CPU frequency.
-show_cpu_freq = True
-
-#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
-#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
-clock_format = "%X"
-
-#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = True
-
-#* Custom cpu model name, empty string to disable.
-custom_cpu_name = ""
-
-#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
-#* Only disks matching the filter will be shown. Prepend exclude= to only show disks not matching the filter. Examples: disk_filter="/boot /home/user", disks_filter="exclude=/boot /home/user"
-disks_filter = ""
-
-#* Show graphs instead of meters for memory values.
-mem_graphs = True
-
-#* Show mem box below net box instead of above.
-mem_below_net = False
-
-#* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = True
-
-#* If swap memory should be shown in memory box.
-show_swap = True
-
-#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = True
-
-#* If mem box should be split to also show disks info.
-show_disks = False
-
-#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = True
-
-#* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = True
-
-#* Setting this to True will hide all datasets, and only show ZFS pools. (IO stats will be calculated per-pool)
-zfs_hide_datasets = False
-
-#* Set to true to show available disk space for privileged users.
-disk_free_priv = False
-
-#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = True
-
-#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
-
-#* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = False
-
-#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
-#* Example: "/mnt/media:100 /:20 /boot:1".
-io_graph_speeds = ""
-
-#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
-net_download = 100
-
-net_upload = 100
-
-#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = True
-
-#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = True
-
-#* Starts with the Network Interface specified here.
-net_iface = ""
-
-#* "True" shows bitrates in base 10 (Kbps, Mbps). "False" shows bitrates in binary sizes (Kibps, Mibps, etc.). "Auto" uses base_10_sizes.
-base_10_bitrate = "Auto"
-
-#* Show battery stats in top right if battery is present.
-show_battery = True
-
-#* Which battery to use if multiple are present. "Auto" for auto detection.
-selected_battery = "Auto"
-
-#* Show power stats of battery next to charge indicator.
-show_battery_watts = True
-
-#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
-#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
-log_level = "WARNING"
-
-#* Measure PCIe throughput on NVIDIA cards, may impact performance on certain cards.
-nvml_measure_pcie_speeds = True
-
-#* Measure PCIe throughput on AMD cards, may impact performance on certain cards.
-rsmi_measure_pcie_speeds = True
-
-#* Horizontally mirror the GPU graph.
-gpu_mirror_graph = True
-
-#* Custom gpu0 model name, empty string to disable.
-custom_gpu_name0 = ""
-
-#* Custom gpu1 model name, empty string to disable.
-custom_gpu_name1 = ""
-
-#* Custom gpu2 model name, empty string to disable.
-custom_gpu_name2 = ""
-
-#* Custom gpu3 model name, empty string to disable.
-custom_gpu_name3 = ""
-
-#* Custom gpu4 model name, empty string to disable.
-custom_gpu_name4 = ""
-
-#* Custom gpu5 model name, empty string to disable.
-custom_gpu_name5 = ""

.config/helix/config.toml

@@ -0,0 +1,2 @@
+theme = "gruvbox_transparent"
+

.config/helix/themes/gruvbox_transparent.toml

@@ -0,0 +1,154 @@
+# Author : Jakub Bartodziej <kubabartodziej@gmail.com>
+# The theme uses the gruvbox dark palette with standard contrast: github.com/morhetz/gruvbox
+
+"annotation" = { fg = "fg1" }
+
+"attribute" = { fg = "aqua1", modifiers = ["italic"] }
+
+"comment" = { fg = "gray", modifiers = ["italic"] }
+
+"constant" = { fg = "purple1" }
+"constant.character" = { fg = "aqua1" }
+"constant.character.escape" = { fg = "orange1" }
+"constant.macro" = { fg = "aqua1" }
+"constructor" = { fg = "purple1" }
+
+"definition" = { underline = { color = "aqua1" } }
+
+"diagnostic" = { underline = { color = "orange1", style = "curl" } }
+"diagnostic.deprecated" = { modifiers = ["crossed_out"] }
+"diagnostic.error" = { underline = { color = "red1", style = "curl" } }
+"diagnostic.hint" = { underline = { color = "blue1", style = "curl" } }
+"diagnostic.info" = { underline = { color = "aqua1", style = "curl" } }
+"diagnostic.warning" = { underline = { color = "yellow1", style = "curl" } }
+# "diagnostic.unnecessary" = { modifiers = ["dim"] }  # do not remove this for future resolving
+
+"error" = { fg = "red1" }
+"hint" = { fg = "blue1" }
+"info" = { fg = "aqua1" }
+"warning" = { fg = "yellow1" }
+
+"diff.delta" = { fg = "yellow1" }
+"diff.minus" = { fg = "red1" }
+"diff.plus" = { fg = "green1" }
+
+"function" = { fg = "green1" }
+"function.builtin" = { fg = "yellow1" }
+"function.macro" = { fg = "blue1" }
+
+"keyword" = { fg = "red1" }
+"keyword.control.import" = { fg = "aqua1" }
+
+"label" = { fg = "red1" }
+
+"markup.bold" = { modifiers = ["bold"] }
+"markup.heading" = "aqua1"
+"markup.italic" = { modifiers = ["italic"] }
+"markup.link.text" = "red1"
+"markup.link.url" = { fg = "green1", modifiers = ["underlined"] }
+"markup.raw" = "red1"
+"markup.strikethrough" = { modifiers = ["crossed_out"] }
+
+"module" = { fg = "aqua1" }
+
+"namespace" = { fg = "fg1" }
+
+"operator" = { fg = "purple1" }
+
+"punctuation" = { fg = "orange1" }
+
+"special" = { fg = "purple0" }
+
+"string" = { fg = "green1" }
+"string.regexp" = { fg = "orange1" }
+"string.special" = { fg = "orange1" }
+"string.symbol" = { fg = "yellow1" }
+
+"tag" = { fg = "aqua1" }
+
+"type" = { fg = "yellow1" }
+"type.enum.variant" = { modifiers = ["italic"] }
+
+#"ui.background" = { bg = "bg0" }
+"ui.background" = {bg = "bg_transparent"}
+"ui.bufferline" = { fg = "fg1", bg = "bg1" }
+"ui.bufferline.active" = { fg = "bg0", bg = "yellow0" }
+"ui.bufferline.background" = { bg = "bg2" }
+
+"ui.cursor" = { fg = "bg1", bg = "bg2" }
+"ui.cursor.insert" = { fg = "bg1", bg = "blue0" }
+"ui.cursor.normal" = { fg = "bg1", bg = "gray" }
+"ui.cursor.select" = { fg = "bg1", bg = "orange0" }
+"ui.cursor.match" = { fg = "fg3", bg = "bg3" }
+
+"ui.cursor.primary" = { bg = "fg3", fg = "bg1" }
+"ui.cursor.primary.insert" = { fg = "bg1", bg = "blue1" }
+"ui.cursor.primary.normal" = { fg = "bg1", bg = "fg3" }
+"ui.cursor.primary.select" = { fg = "bg1", bg = "orange1" }
+
+"ui.cursorline" = { bg = "bg0_s" }
+"ui.cursorline.primary" = { bg = "bg1" }
+
+"ui.help" = { bg = "bg1", fg = "fg1" }
+"ui.linenr" = { fg = "bg3" }
+"ui.linenr.selected" = { fg = "yellow1" }
+"ui.menu" = { fg = "fg1", bg = "bg2" }
+"ui.menu.selected" = { fg = "green1", bg = "bg1", modifiers = ["bold"] }
+"ui.popup" = { bg = "bg1" }
+"ui.picker.header.column" = { underline.style = "line" }
+"ui.picker.header.column.active" = { modifiers = ["bold"], underline.style = "line" }
+"ui.selection" = { bg = "bg2" }
+"ui.selection.primary" = { bg = "bg3" }
+
+"ui.statusline" = { fg = "fg1", bg = "bg2" }
+"ui.statusline.inactive" = { fg = "fg4", bg = "bg2" }
+"ui.statusline.insert" = { fg = "bg1", bg = "blue1", modifiers = ["bold"] }
+"ui.statusline.normal" = { fg = "bg1", bg = "fg3", modifiers = ["bold"] }
+"ui.statusline.select" = { fg = "bg1", bg = "orange1", modifiers = ["bold"] }
+
+"ui.text" = { fg = "fg1" }
+"ui.text.focus" = { fg = "green1", bg="bg1" }
+"ui.text.directory" = { fg = "blue1" }
+"ui.virtual.inlay-hint" = { fg = "gray" }
+"ui.virtual.jump-label" = { fg = "purple0", modifiers = ["bold"] }
+"ui.virtual.ruler" = { bg = "bg1" }
+"ui.virtual.whitespace" = "bg2"
+"ui.virtual.wrap" = { fg = "bg2" }
+"ui.window" = { bg = "bg1" }
+
+"variable" = { fg = "fg1" }
+"variable.builtin" = { fg = "orange1", modifiers = ["italic"] }
+"variable.other.member" = { fg = "blue1" }
+"variable.parameter" = { fg = "blue1", modifiers = ["italic"] }
+
+
+[palette]
+bg0 = "#282828"   # main background
+bg0_s = "#32302f"
+bg1 = "#3c3836"
+bg2 = "#504945"
+bg3 = "#665c54"
+bg4 = "#7c6f64"
+
+fg0 = "#fbf1c7"
+fg1 = "#ebdbb2" # main foreground
+fg2 = "#d5c4a1"
+fg3 = "#bdae93"
+fg4 = "#a89984"
+
+gray = "#928374"
+
+red0 = "#cc241d"    # neutral
+red1 = "#fb4934"    # bright
+green0 = "#98971a"
+green1 = "#b8bb26"
+yellow0 = "#d79921"
+yellow1 = "#fabd2f"
+blue0 = "#458588"
+blue1 = "#83a598"
+purple0 = "#b16286"
+purple1 = "#d3869b"
+aqua0 = "#689d6a"
+aqua1 = "#8ec07c"
+orange0 = "#d65d0e"
+orange1 = "#fe8019"

.gnupg/gpg-agent.conf

@@ -0,0 +1,4 @@
+enable-ssh-support
+default-cache-ttl 600
+max-cache-ttl 7200
+pinentry-program /usr/bin/pinentry

.zshrc

@@ -5,8 +5,6 @@
 export ZSH="$HOME/.oh-my-zsh"
 export ZSHC="$HOME/.zshrc"
 
-alias zconf="helix $ZSHC"
-
 # Set name of the theme to load --- if set to "random", it will
 # load a random theme each time Oh My Zsh is loaded, in which case,
 # to know which specific one was loaded, run: echo $RANDOM_THEME
@@ -66,7 +64,7 @@ ZSH_THEME="arrow"
 # HIST_STAMPS="mm/dd/yyyy"
 
 # Would you like to use another custom folder than $ZSH/custom?
-# ZSH_CUSTOM=/path/to/new-custom-folder
+ZSH_CUSTOM=~/.config/ohmyzshcustom
 
 # Which plugins would you like to load?
 # Standard plugins can be found in $ZSH/plugins/
@@ -106,5 +104,5 @@ source $ZSH/oh-my-zsh.sh
 # alias zshconfig="mate ~/.zshrc"
 # alias ohmyzsh="mate ~/.oh-my-zsh"
 
-export SSH_AUTH_SOCK=$(gpgconf --list-dirs agent-ssh-socket)
-alias ls='ls -lah --color=auto'
+export SSH_AUTH_SOCK="$(gpgconf --list-dirs agent-ssh-socket)"
+